Suzhou Yuedar Textile Machinery Co., Ltd.
Product  Brush ,Textile Machinery  Spare Parts

The production of wool tops and wool flakes

Issuing time:2022-04-27 11:00

There are mainly eight quality assessment standards for the fiber bulking nose tops: mean net weight error, net weight unevenness, mean length error, gross excess rate, short gross rate, wool grain, wool piece, and steam shrinkage. The wool grain and the wool piece are two of the eight quality index values of the nylon top. Cmbing brush for NSC PB33The wool grain refers to the small worry body in which the fibers in the top are tangled together and cannot be moved with a needle, and the larger wool grain is regarded as a wool piece. wool tops‍   Circular brushes

Fineness: Short fibers with fine fineness are easy to cause hair grains in the production process of tops, that is, fiber entanglement, and hair flakes in serious cases. Fiber elongation and compressive strength: wool tops‍ Circular brushesThe elongation and compressive strength of short fibers are too high, which leads to difficulty in drafting of the tearing machine, making the unloading speed very high, resulting in rough key points, resulting in poor drafting and finishing effect of the needle-carding machine. Causes unevenness, and filaments, wool grains, wool pieces and longer fibers, etc., so select short fibers with moderate fiber elongation and compressive strength according to the type of production.

Circular brushes

The tearing machine is composed of a cook wire guide mechanism, a thermal expansion mechanism, a pulling mechanism, a crimping mechanism, a steaming mechanism, a dust removal mechanism, a refrigeration mechanism, a charging mechanism, and a transmission system mechanism. Cmbing brush for NSC PB32wool topsThe cook wire guide mechanism is to remove the false twist, unstacking and irregular state of the staple fiber needle-carding machine caused by loading, and maintain the short fiber to pass in the middle of the arc pendulum, According to the amplitude control and precise positioning, the short fiber thickness is constant and the windrower is well-proportioned.wool tops If the short fiber spreader of the windrower is not properly manipulated, it will be disassembled and twisted into the tearing machine, so that the thickness of the short fiber will be uneven, and the heating bearing capacity will be uneven. Fibers, etc., make the finishing and drafting of the needle-carding machine difficult, and it is easy to cause uneven evenness, wool grains, wool flakes, and hairs and other indicators exceeding the standard. To produce clean, well-proportioned, and length-conforming tear-off strips.


The machinery and equipment for the production of nylon bulked nose tops. My production workshop uses the needle carding machines SMC-400 and SC-400 made in Spain. After long-term applicationPin strips, there are many problems. This kind of problem is very easy to make everything normal. In the production process, the hair grains and hair flakes are caused. The following is a more detailed analysis of the above two types of machinery and equipment: The feeding part of the guide bar platform has burrs to shave, which is very easy to cause worrying hair particles and hair flakes. The sanding sandpaper gently polishes the top safety channel. Part of the effect of dust removal is to eliminate dust, flying hair, short fiber dander, etc. from the work area in the future by gas dust removal. Follow the safety operation rules, and clean it once in a while to maintain the cleanliness of the work area. The condition of the needle plate in the comb box is not very good, such as bent needles, steel nails, etc. wool topsor the relative density is not large, or mixed needles, etc., the needle plate smoke and dust on the needle plates of the left and right comb boxes are not cleaned in time after the roller brush is wound. If the problem is solved, wool topsit will cause the random hair to continue to turn in the fiber. As a result, the needle plate is not cleaned, Circular brushesbut the broken hair and dust are brought into the evenness, which will endanger the quality of the product; The cluster frame, copper rod, shaving at the entrance of the slot, depositing dust and flying hair between the outgoing rollers are very easy to produce hair particles and hair flakes. Therefore, the operator should pay attention to the actual operation, wool topspark on time and do a good job in the separation and management of the machinery and equipment, ensure that the dust removal air duct is unobstructed, and immediately remove and replace the needle plate that is not closed.

Circular brushes

Product quality is determined by a variety of factors. Many safety accidents can be prevented according to raw materials, processing technology of machinery and equipment, and reliable operation, but people are the most important, and the meticulousness of the actual operating staff determines the final quality of the product. . NSC-RLAfter long-term sexual life practice, the staff using the top positions should have the operating skills to distinguish the quality of the short fibers from the appearance and touch. Strictly control the good quality, wool topsand the filaments that do not conform to the immediate method of making tops should not be used on the machine. In operation, we only need to have a relatively high sense of quality responsibility, and we can manipulate the raw materials, machinery and equipment processing technology and other aspects by human factors.Circular brushes


Share to:
About us We product wide range of brushes for the textile industry, in particular for combing wool and cotton, in many versions and sizes for NSC Schlumberger, Rieter and Sant’Andrea machines.The various models are made of Natural or Extrastiff Tampico and also Nylon, as well as a wide range of accessories, such as strips in bristle, horsehair, goat hair and nylon.
Press-in Strips in all sizes for different NSC, COGNETEX, ST. ANDREA , OKK , etc. Gill Boxes.
High Quality Press-in Pin strips in all sizes for NSC GN/GC /GV Gill Boxes, COGNETEX, OKK, SANT ANDREA & for other makes on request.
Contact us
Contact email:market@ydrtexm.com
Contact phone :+8618015626503
Whatsapp:8618015626503
Contact address: CHINA SUZHOU city, JIANGSU