Suzhou Yuedar Textile Machinery Co., Ltd.
Product  Brush ,Textile Machinery  Spare Parts

E86 type comber brush

Issuing time:2022-02-23 11:00

In the field of cotton textiles, the cost of raw materials accounts for more than 70% of the cost. The noil rate of the comber immediately harms the cost of cotton and the quality of the finished yarn. Increasing the noil rate will gradually improve the carding quality, but at the same time, it will also increase the cost of the product. Therefore, the noil rate of the comber is the highest in spinning. Key performance indicators and economic development hazards of spinning mills. Therefore, it is very important to select the main technical parameters such as the appropriate carding gap to ensure the stable quality of cotton yarn and reduce the noil rate [1].

At this stage, there is little scientific research on this level, and it has not been highly valued by most manufacturing companies, but it is very important to fully utilize the comber. The eight carding positions in the E86 type comber all adopt a new aRieter Brushdjustable cylinder, which can be adjusted to obtain the ideal carding gap and keep the carding gap on all carding positions consistent. In this paper, the harm to the actual effect of the combing machine is discussed from the dimensions of the E86 type combing cylinder carding gap and the consistency of the carding gap. E86 type comber brush


2 Comber brush 10089450.jpg Results (1) The smaller the cylinder carding gap of E86 comber brush, the better the actual effect of carding, and the better the quality of the final spun yarn, but when the carding gap is too long , it will cause too much carding, part of the long chemical fibers are carded off, and the noil is greatly improved, but the final spun yarn quality deteriorates. Therefore, an effective carding gap should be selected according to the characteristics of the raw materials.


(2) The better the consistency of the carding gap, the better the combing sliver after carding.


The more stable the short staple composition is, the more stable the final yarn quality is. It is recommended that manufacturing enterprises decide


Periodically check and adjust the consistency of the cylinder carding gap


We deal in a wide range of brushes for the textile industry, in particular for combing wool and cotton, in many versions and sizes for NSC Schlumberger, Rieter and Sant’Andrea machines.The various models are made of Natural or Extrastiff Tampico and also Nylon, as well as a wide range of accessories, such as strips in bristle, horsehair, goat hair and nylon. comber brush,Circular brushes,industrial brush



Share to:
About us We product wide range of brushes for the textile industry, in particular for combing wool and cotton, in many versions and sizes for NSC Schlumberger, Rieter and Sant’Andrea machines.The various models are made of Natural or Extrastiff Tampico and also Nylon, as well as a wide range of accessories, such as strips in bristle, horsehair, goat hair and nylon.
Press-in Strips in all sizes for different NSC, COGNETEX, ST. ANDREA , OKK , etc. Gill Boxes.
High Quality Press-in Pin strips in all sizes for NSC GN/GC /GV Gill Boxes, COGNETEX, OKK, SANT ANDREA & for other makes on request.
Contact us
Contact email:market@ydrtexm.com
Contact phone :+8618015626503
Whatsapp:8618015626503
Contact address: CHINA SUZHOU city, JIANGSU