Suzhou Yuedar Textile Machinery Co., Ltd.
Product  Brush ,Textile Machinery  Spare Parts

A double power outage synchronization system TFO Twisting machinery parts VTS08/09

Issuing time:2023-11-04 11:00


A double power outage synchronization system

Looking for high-quality TFO twisting machinery parts for your textile production line?

Look no further than Suzhou Yuedar Textile Machinery Co., Ltd. Our VTS08/09 parts are designed with precision to

The utility model discloses a power-off synchronization system of a double twist machine System, including: controller C1, transverse drive U1, transverse motor M1, Winding drive U2, winding motor M2, spindle driver U3, ingot Sub-motor M3, external power supply P1, switch power supply P2, power-off detection Device D1, power supply switch S1, speed measurement sensor Z. This system is double twist the external power off, can realize the transverse motor, winding motor, Ingot motor The synchronous shutdown of the three motors, to ensure the yarn twist Within the standard, the system adopts energy return according to the characteristics of the twist machine Feed principle, without an additional energy storage device, effectively solve the double twist  The problem of machine power failure synchronization greatly saves the cost and improves the reliability nature.

double power outage synchronization system, TFO twisting machinery parts, VTS08/09, Suzhou Yuedar Textile Machinery Co., Ltd.

1 . TFO Twisting machinery parts VTS08/09A double power outage synchronization system characterized by: Controller C1, transverse driver U1, transverse motor M1, winding driver U2, winding motor M2, spindle driver U3, spindle motor M3, external power supply P1, switching power supply P2, power off detector D1, power switch S1, speed sensor Z; The transverse driver U1 and the transverse motor M1, the winding driver U2 to the winding motor M2, the spindle driver U3 and the spindle motor M3; The control output of the controller C1 is connected to the transverse driver U1, the winding driver U2, the spinddriver U3, and the signal input of the controller C1 is connected to the power off detector D1, the speed sensor Z;  The power supply input of the spindle drive U3 is connected to the external power supply P1, and the bus voltage of the spindle driver U3 is respectively connected to the bus terminal of the transverse drive U1 and the bus terminal of the winding drive U2; The power input of the power supply switch S1 is connected to the switching power supply P1 and the 24VDC _2 output terminal of the spindle driver U 3, respectively, and the power output of the power supply switch S1 is connected to the power input of the controller C1 and the speed sensor Z, respectively. 2. A synchronization system according to claim 1, wherein: The speed sensor Z includes a first speed sensor Z1 and a second speed sensor Z2, the first speed sensor Z1 is connected to the controller C1 for detecting the speed of the driving friction wheel driven by the winding motor M2, and the second speed sensor Z2 is connected to the controller C1 for detecting the rotation speed of the spindle driven by the spindle motor M3. 3. A synchronization system according to claim 1, wherein: The external power supply P1 is a three-phase 380V AC power supply, the L1, L2, L3 and PE terminals of the external power supply P1 are connected to the power supply input of the spindle driver U3, and the L1 and the N terminals of the external power supply P1 are connected in parallel to the power off detector D1 and the switch power supply P2. 4. A synchronization system according to claim 3, wherein: A power supply switch K1 is provided between the terminals L1, L2, and L3 of the external power supply P1 and the spindle driver U3. 5. A synchronization system according to claim 1, wherein: The transverse motor M1 is a servo motor, the winding motor M2 is an assynchronous motor or synchronous motor or servo motor, and the spindle motor M3 is an assynchronous motor or synchronous motor. 6. A synchronization system according to claim 1, wherein: The brake resistance R1 is also connected to the winding drive U2.



A double power outage synchronization system


TFO Twisting machinery parts VTS08/09technical field:

[0001]The utility model belongs to the field of textile machinery, specifically involves a power outage synchronization system.

double power outage synchronization system, TFO twisting machinery parts, VTS08/09, Suzhou Yuedar Textile Machinery Co., Ltd.

Background Technology:

[0002]In the double twist machine system, the spindle rotation speed and the friction wheel winding speed are required to achieve the specified twist. The previous mechanical transmission models, because the spindle speed, friction wheel and molding box is achieved by gear transmission, so at any time will maintain a certain transmission relationship, to ensure that the twist is unchanged, horizontal moving synchronous stop. However, when the spindle, friction wheel and transverse movement are driven by different motors, the yarn twist is set through the touch screen, and the controller calculates the corresponding inverter frequency and sets it to realize the flexibility of the twist setting. However, when the power supply is accidentally cut off, the motors cannot be stopped with the original required ratio, which causes unqualified yarn twist; waste yarn and human resources. [0003]Chinese Patent Application No.201420517539.X, On January 14,2015, It discloses a twist protection device, Including twist control cabinet, UPS power supply, winding active roller drive motor, rolling transverse device drive motor and spindle, Fixed the speed sensor on the double ist frame, During the power failure, UPS power initiation, UPS power supplies the rolling control cabinet, winding active roller drive motor, rolling transverse drive motor and speed sensor, The speed sensor detects the speed signal of the twist spindle, The speed signal is transmitted to the twist control cabinet, According to the speed signal, the control cabinet controls the speed signal. In the case of sudden power failure, it can still maintain the twist of the twist machine in a reasonable range, ensuring the quality of the yarn produced by the twist machine. However, the structure of the device is complex, and the cost of UPS power supply is high, and the space is large, which increases the economic burden of the enterprise. In addition, the application life of UPS power supply in the factory environment will also have an impact.


Utility model content:

[0004]Therefore, the technical problem to be solved by the utility model lies in the complex structure of the power off protection device used in the existing technology, and the high cost of UPS power supply and the large space, which increases the economic burden of the enterprise, and the UPS power supply The application life in the factory environment will also have an impact, so a power outage synchronization system is proposed.[0005]To achieve the above purpose, the technical scheme of the utility model is as follows: [0006]A double outage synchronization system comprising: [0007]Controller C1, transverse driver U1, transverse motor M1, winding driver U2, winding motor M2, spindle driver U3, spindle motor M3, external power supply P1, switching power supply P2, power off detector D1, power switch S1, speed sensor Z. [0008]The transverse drive U1 is connected to the transverse motor M1, the winding driver U2 is connected to the winding motor M2, and the spindle driver U3 is connected to the spindle motor M3. [0009]The control output of the controller C1 is connected to the transverse driver U1, the winding driver U2, the spindle driver U3, and the signal input of the controller C1 is connected to the power off detector D1, the speed sensor Z. [0010]The power supply input of the spindle drive U3 is connected to the external power supply P1, and the bus voltage of the spindle driver U3 is respectively connected to the bus terminal of the transverse driver U1 and the bus terminal of the winding drive U2.


[0011]The power input of the power supply switch S1 is connected to the switching power supply P1 and the 24VDC _2 output terminal of the ingot driver U3, respectively, and the power output of the power supply switch S1 is connected to the power input of the controller C1 and the speed sensor Z, respectively. [0012]As a preference of the above technology, the speed sensor Z includes a first speed sensor Z1 and a second speed sensor Z2, the first speed sensor Z1 is connected to the controller C1 for detecting the speed of the transmission friction wheel of the winding motor M2, and the second speed sensor Z2 is connected to the controller C1 for detecting the rotation speed of the spindle driven by the spindle motor M3. [0013]As a preference of the above technical scheme, the external power supply P1 is a three-phase 380V AC power supply, the L1, L2, L3 and PE terminals of the external power supply P1 are connected to the power input end of the spindle driver U3, and the L1 and the N terminals of the external power supply P1 are connected in parallel to the power off detector D1 and the switching power supply P2. [0014]As a preference of the above technical solution, a power switch K1 is provided between terminals L1, L2 and L3 of the external power supply P1 and the spindle driver U3. [0015]As a preference of the above technical scheme, the transverse motor M1 is a servo motor, the winding motor M2 is an asynchronous motor or synchronous motor or servo motor, and the spindle motor M3 is an asynchronous motor or synchronous motor. [0016]As preferred, the winding drive U2 is also connected with a brake resistance R1. [0017]The beneficial effect of the utility model is: the system in the double twist the external power failure, can realize the transverse motor, winding motor, spindle motor motor synchronous shutdown, ensure the yarn twist within the standard, the energy feedback principle, without additional energy storage device, effectively solve the twist of power synchronization problem, greatly save the cost and provide reliability.


Appendix description:

[0018]The following drawings are intended to illustrate and explain the utility model, and do not limit the scope of the utility model.among: [0019]FIG. 1 is a block diagram of a circuit of an embodiment of the utility model.

double power outage synchronization system, TFO twisting machinery parts, VTS08/09, Suzhou Yuedar Textile Machinery Co., Ltd.

Specific implementation methods:

[0020]As shown in FIG. 1, the power-off synchronization system of the utility model, comprising: [0021]Controller C1, transverse driver U1, transverse motor M1, winding driver U2, winding motor M2, spindle driver U3, spindle motor M3, external power supply P1, switching power supply P2, power off detector D1, power switch S1, speed sensor Z. [0022]The transverse drive U1 is connected to the transverse motor M1, the winding driver U2 is connected to the winding motor M2, and the spindle driver U3 is connected to the spindle motor M3. The transverse motor M1 is driven by transverse driver U1, servo motor, three phase 380 Vac; the winding motor M2 is an assynchronous motor or synchronous motor or servo motor driven by winding driver U2, three phase 380 Vac; the spindle motor M3 is synchronous motor or synchronous motor driven by spindle driver U3, three phase 380 Vac. [0023]The control output of the controller C1 is connected to the transverse driver U1, the winding driver U2, the spindle driver U3, and the signal input of the controller C1 is connected to the power off detector D1, the speed sensor Z. [0024]Wherein the driver wiring is as follows: the power input of the spindle driver U3 is connected to the external power supply P1, and the bus voltage of the spindle driver U3 is connected with the bus terminal of the transverse driver U1, the winding drive

double power outage synchronization system, TFO twisting machinery parts, VTS08/09, Suzhou Yuedar Textile Machinery Co., Ltd.

The bus terminal of the driver U2 is connected so that the bus voltage of the three drives is connected together. The 380V power input terminal of the winding driver U2 and the transverse driver U1 does not input the voltage; the control power supply of the transverse driver U1 is connected to the bus terminal so that the control logic of the servo driver can obtain the voltage. [0025]Specifically, the power connection of the control system is as follows: since the power off synchronization process requires a long time (different spindle speeds will have different time), the controller C1 and the speed sensor Z need to maintain the normal operating voltage, while the switching power supply P2 after the external power source P1 is disconnected, the spindle driver U3 usually has 24V output power supply 24VDC_2, while the spindle driver U3 keeps the voltage for output.24VDC_1 and 24VDC_2 are connected to the power switch, and whenever any one of them is charged, 24VDC ensures a stable voltage to supply the controller C1 and the speed sensor Z. [0026]The power input of the power supply switch S1 is connected to the switching power supply P1 and the 24VDC _2 output terminal of the ingot driver U3, respectively, and the power output of the power supply switch S1 is connected to the power input of the controller C1 and the speed sensor Z, respectively. [0027]The speed sensor Z includes a first speed sensor Z1 and a second speed sensor Z2, the first speed sensor Z1 is connected to the controller C1 for detecting the speed of the driving friction wheel driven by the winding motor M2, and the second speed sensor Z2 is connected to the controller C1 for detecting the rotation speed of the spindle driven by the spindle motor M3. The first speed sensor Z1 is for acquiring the winding speed, and the second speed sensor Z2 is for acquiring the spindle speed and transmitting the speed information to the controller C1. [0028]The external power supply P1 is a three-phase 380V AC power supply, the L1, L2, L3 and PE terminals of the external power supply P1, the power input of the spindle driver U3, and the L1 of the external power supply P1 in parallel to the power off detector D1 and the switch power supply P2. In this embodiment, a power switch K1 is provided between the L1, L2, and L3 terminals of the external power supply P1 and the spindle driver U3. [0029]The brake resistance R1 is also connected to the winding drive U2. [0030]The control method and working principle of this system are as follows: [0031]S1: When the system is running normally, obtain the winding speed V1 through the first speed sensor Z1, the spindle speed V2 through the second speed sensor Z2, and the twist N1 through the controller C1. [0032]S2: When the external power supply P1 (L1, L2, L3, N) loses power, the power off detector D1 detects the stop electrical signal and outputs the signal to the controller C1. After the controller C1 detects the broken electric signal, it enters the power off synchronization process. [0033]S3: the controller C1 sends a signal to the spindle driver U3, the ingot driver U3 enters the energy feedback state and controls the bus voltage range, the spindle driven by the spindle motor has great inertia and kinetic energy, the ingot driver U3 transforms the kinetic energy into electric energy (energy feedback), and provides it to the winding driver U2, the transverse driver U1 and the power switch S1. [0034]S4: The transverse driver U1 receives a signal from the controller C1 and drives the transverse motor M1 for short stroke processing to prevent yarn spinning. [0035]S5: The controller C1 uses the second speed sensor to detect the current spindle speed V2 in real time, monitors the current winding speed V1 with the first speed sensor Z1, and controls the winding driver U 2 according to the twist N1. [0036]S6: The controller C1 records the spindle speed curve in real time. Through the software algorithm, it calculates the optimal winding motor control and curve, and uses the specific algorithm to stop the spindles, the spindles and the transverse motion synchronously, in which the spindle and the winding need to be decelerated and stopped synchronously according to the twist ratio. [0037]S7: Finally, the three motors are synchronized to stop. [0038]Due to the sudden power failure of the twist machine in high speed operation, the double twist machine driven by the spindle motor has great habit

double power outage synchronization system, TFO twisting machinery parts, VTS08/09, Suzhou Yuedar Textile Machinery Co., Ltd.

Sex and kinetic energy, the kinetic energy through the ingot drive into electric energy (energy feedback), provided to the winding drive and transverse drive, dynamic use, the controller through the sensor speed, using specific algorithm to the ingot, winding and transverse synchronous stop, the ingot and winding need in accordance with the twist ratio synchronous deceleration and stop. [0039]The power failure synchronization system of the present embodiment described includes the controller C1, horizontal moving driver U1, transverse motor M1, winding driver U2, winding motor M2, spindle driver U3, spindle motor M3, external power supply P1, switching power supply P2, power supply detector D1, power switch S1, and speed measuring sensor Z. When the system in times twist external power, can realize the transverse motor, winding motor, spindle motor synchronous shutdown, ensure the yarn twist within the standard, the system according to times twist, characteristics, using the energy feedback principle, without additional energy storage device, effectively solve the problem of times twist power synchronization, greatly save the cost and provides the reliability. [0040]Obviously, the above embodiments are only for the example given, not for the embodiment. For ordinary technicians in the field, other different forms of changes or changes can be made on the basis of the above description. There is no need for and beyond all implementation. The obvious changes or changes are still in the protection scope created by the utility model.

Looking for high-quality TFO twisting machinery parts for your textile production line? Look no further than Suzhou Yuedar Textile Machinery Co., Ltd. Our VTS08/09 parts are designed with precision to


Share to:
About us We product wide range of brushes for the textile industry, in particular for combing wool and cotton, in many versions and sizes for NSC Schlumberger, Rieter and Sant’Andrea machines.The various models are made of Natural or Extrastiff Tampico and also Nylon, as well as a wide range of accessories, such as strips in bristle, horsehair, goat hair and nylon.
Press-in Strips in all sizes for different NSC, COGNETEX, ST. ANDREA , OKK , etc. Gill Boxes.
High Quality Press-in Pin strips in all sizes for NSC GN/GC /GV Gill Boxes, COGNETEX, OKK, SANT ANDREA & for other makes on request.
Contact us
Contact email:market@ydrtexm.com
Contact phone :+8618015626503
Whatsapp:8618015626503
Contact address: CHINA SUZHOU city, JIANGSU