Suzhou Yuedar Textile Machinery Co., Ltd.
Product  Brush ,Textile Machinery  Spare Parts

Short fiber times twist machine brake rebound structure TFO Twisting Machinery Parts VTS08/09 - Suzh

Issuing time:2023-10-28 11:00

Short fiber times twist machine brake rebound structure

The utility model discloses a short fiber fold twisting machine brake rebound

TFO Twisting Machinery PartsStructure, including the ingot board, rocker arm seat, rocker arm, rocker arm shaft, brake seat,

Brake skin, torsion spring, torsion spring retaining seat, hinge shaft, pull rod and spindle,

The rTFO Twisting Machinery Partsocker holder is fixed to the ingot board, and the rocker holder is fixed to the shake

At the right end of the arm seat, the pull rod is hung on the rocker arm, and the brake seat is connected

The overhinge shaft is fixed on the ingot plate, and the torsion spring holder is fixed

On the hinge shaft, the end of the torsion spring is fixed to the brake seat and the other

The end is fixed on the torsion spring holder, and the brake skin is mounted on the brake

The rear end, the spindle plate is set at the rear end of the brake skin under the rocker arm

The square ingot plate has a round hole, the pull rod through the round hole and the foot

The pedals are connected, and this short fiber fold twist machine brake rebound structure is improved

Brake service life, brake rebound force can be carried out according to the need from

By the adjustment, reduced the number of maintenance, the overall use cost is reduced.

TFO Twisting Machinery Parts

1. A brake rebound structure, Including the ingot plate, rocking arm seat, rocking arm, rocking arm, rocking arm shaft, brake seat, brake skin, torsion spring, torsion spring retaining seat, hinge shaft, pull rod and ingot plate, Its characteristic is: the rocker arm holder is fixed to the ingot board; The rocker arm is fixed to the right end of the rocker arm seat; The pull rod is hung on the rocker arm; The brake seat is fixed to the spindplate through a hinge shaft; The torsion spring holder is fixed to the hinge shaft; One end of the torsion spring is fixed to the brake seat, The other end is fixed on the torsion spring retaining seat; The brake cover is mounted at the rear end of the brake seat; The spindle disk is set at the rear end of the brake skin.

2. The brake rebound structure of the fiber according to claim 1, wherein the brake skin is fixed to the brake seat by a screw connection.

3. The structure of the brake rebound according to claim 1, wherein the brake skin near the side of the spindle is provided with a radian compatible with the spindle.

4. The brake rebound structure of the fiber according to claim 1, wherein the ingot plate below the rocker arm has a round hole, and the pull rod is connected to the footpedal through the round hole.

TFO Twisting Machinery Parts, Suzhou Yuedar Textile Machinery Co., Ltd., VTS08/09, spinning, twisting, yarns, apparel, home textiles, industrial fabrics, customized solutions, advanced technology, exp


Short fiber times twist machine brake rebound structure


technical field

[0001] The utility model relates to a textile machinery, specifically a spindle brake rebound device for a short fiber fold twisting machine.


Background technology

[0002] times twist machine is two or more yarn twist into strands of textile machinery, ingot is times the yarn twist the indispensable important parts, due to the ingot in the process of twist work, always inevitable the phenomenon of broken yarn, broken head if not timely bonding yarn on the ingot will cause winding, not only can cause the waste of yarn, time long will also cause damage to machinery and equipment.

[0003] yarn after broken end must first to the spindle brake, and then to yarn bonding, the spindle brake mode is: the pedal spindle brake pedal, make the brake brake and spindle spindle contact, rely on the friction between the spindle and spindle spindle spindle brake, joint, loosen the foot pedal, rely on the brake spring on the brake reset, make the brake skin and spindle spindle, restore the spindle rotation.

[0004] The brake rebound on the brake device is realized by the plate spring, the brake action stroke is long, the use of the plate spring structure for a long time is easy to make the plate spring elastic fatigue, and the plate spring is easy to deform or even break. In use, the plate spring needs to be replaced frequently, the cost is high, and the brake rebound effect is not ideal, so that the brake skin and the ingot plate is not sufficient, the rotation speed of the ingot is affected, and ultimately affect the twist and quality of the yarn.


Invention content

[0005] The technical problem to be solved by the utility model is to provide a rebound device for the spindle brake device of the double twist machine, which not only acts reliably, but also greatly extends the service life and adjusts more convenient.

[0006] The utility model is realized by the following technical scheme: a short fiber fold twist machine brake rebound structure, Including the ingot plate, rocking arm seat, rocking arm, rocking arm, rocking arm shaft, brake seat, brake skin, torsion spring, torsion spring retaining seat, hinge shaft, pull rod and ingot plate, The rocker holder is fixed to the ingot plate; The rocker arm is fixed to the right end of the rocker arm seat; The pull rod is hung on the rocker arm; The brake seat is fixed to the spindplate through a hinge shaft; The torsion spring holder is fixed to the hinge shaft; One end of the torsion spring is fixed to the brake seat, The other end is fixed on the torsion spring retaining seat; The brake cover is mounted at the rear end of the brake seat; The spindle disk is set at the rear end of the brake skin.

[0007] As preferred, the brake skin is fixed to the brake seat via a screw connection.

[0008] As preferred, the brake skin near the side of the disk is provided with a radian compatible with the disk.

[0009] As preferred, the ingot plate below the rocker arm has a round hole, and the pull rod is connected to the footpedal through the round hole.[0010] The beneficial effect of the utility model is that the brake return structure of the short fiber fold twist machine improves the service life of the brake, the brake return force can be adjusted freely according to the need, the number of maintenance is reduced, and the overall use cost is reduced.

TFO Twisting Machinery Parts, Suzhou Yuedar Textile Machinery Co., Ltd., VTS08/09, spinning, twisting, yarns, apparel, home textiles, industrial fabrics, customized solutions, advanced technology, exp

Attached figure description

[0011] In order to be easily explained, the utility model is described in detail by the following specific embodiments and the attached drawings.

[0012] FIG. 1 is the main view of the brake rebound structure of the short fiber twist of the utility model;

[0013] FIG. 2 is a top view of the brake rebound structure of the short fiber twist of the utility model.



Specific implementation methods

[0014] As shown in Figures Figure 1 and 2, In the brake rebound structure of a short fiber machine of the utility model, Including spindle plate 9, rocker arm holder 8, rocker arm 3, rocker arm shaft 5, brake seat 2, brake skin 11, torsion spring 1, torsion spring holder 6, hinge shaft 7, pull rod 4 and spindle plate 10, The rocker holder 8 is fixed to the spindle plate 9; The rocker arm 3 is fixed to the right end of the rocker holder 8, The rocker arm 3 may be rotated around the rocker arm shaft 5; The pull rod 4 is mounted on the rocker arm 3; The brake seat 2 is fixed to the spindle board 9 through the hinge shaft 7, The brake seat 2 can rotate freely around the hinge shaft 7; The torsion spring holder 6 is fixed to the hinge shaft 7, The initial position of the torsion spring holder 6 on the hinge shaft 7 can be freely adjusted, The torsion spring 1 to obtain a different initial pressure; One end of the torsion spring 1 is fixed to the brake seat 2, The other end is fixed on the torsion spring retaining seat 6; The brake skin 11 is mounted at the rear end of the brake seat 2; The spindle tray 10 is disposed at the rear end of the brake skin 11.

[0015] wherein the brake pad 11 is fixed to the brake pad 2 by a screw connection; the brake pad 11 near the side of the spindle pad 10 is provided with a radian compatible with the spindle pad 10; the spindle plate 9 below the rocker arm 3 has a circular hole through which the pull rod 4 connects to the foot pedal (not shown).

[0016] When the yarn joint is broken, foot on the pedal (not shown), the pull rod 4 moves down to drive the rocking arm 3, the swing arm 3 drives the brake seat 2 around the hinge shaft 7, and the brake seat 2 drives the torsion spring 1, the torsion spring 1 starts energy storage, the brake cover 11 contacts the spindle plate 10 and the spindle stops turning; when the joint is completed, release the foot pedal, the torsion spring 1 drives the brake seat 2, the brake cover 11 discontact with the spindle, and the spindle resumes rotation.

[0017] The beneficial effect of the utility model is that the brake return structure of the short fiber fold twist machine improves the service life of the brake, the brake rebound force can be freely adjusted according to the need, the number of maintenance is reduced, and the overall use cost is reduced.

[0018] The above is only a specific implementation of the utility model, but the protection scope of the utility model is not limited to this, any change or replacement not thought of by creative labor should be covered within the protection scope of the utility model. Therefore, the protection scope of the utility model shall be subject to the protection scope specified in the claim.

TFO Twisting Machinery Parts, Suzhou Yuedar Textile Machinery Co., Ltd., VTS08/09, spinning, twisting, yarns, apparel, home textiles, industrial fabrics, customized solutions, advanced technology, exp

TFO Twisting Machinery Parts

As a leading manufacturer of textile machinery in China, Suzhou Yuedar Textile Machinery Co., Ltd. offers a wide range of high-quality TFO twisting machinery parts.



Share to:
About us We product wide range of brushes for the textile industry, in particular for combing wool and cotton, in many versions and sizes for NSC Schlumberger, Rieter and Sant’Andrea machines.The various models are made of Natural or Extrastiff Tampico and also Nylon, as well as a wide range of accessories, such as strips in bristle, horsehair, goat hair and nylon.
Press-in Strips in all sizes for different NSC, COGNETEX, ST. ANDREA , OKK , etc. Gill Boxes.
High Quality Press-in Pin strips in all sizes for NSC GN/GC /GV Gill Boxes, COGNETEX, OKK, SANT ANDREA & for other makes on request.
Contact us
Contact email:market@ydrtexm.com
Contact phone :+8618015626503
Whatsapp:8618015626503
Contact address: CHINA SUZHOU city, JIANGSU